I have recently finished a number of display and control units for pedal power demonstration systems. These projects have been in conjunction with Magnificent Revolution, who have been providing the actual pedal generators.
The systems consist of:
These systems have been built for the Arcola Theatre, the Carbon Smart program, Magnificent Revolution and for myself. Read on for more details and a video of the units in action.
The displays seem to work really well as an obvious feed back system to help people understand their power and energy use. Check out Adam on the unit installed at the Arcola Theatre here:
The LED bar graph display has been written up as an Instructable. It contains ten 12V dc LED clusters controlled by shift registers.
The shunt control box contains 2 MOSFETs with dump load resistors and a fan to blow away the excess power as heat. The 'brains' is an ATmega 328 microprocessor. The code was developed using the Arduino microcontroller, but, due to the start up delay of the Arduino bootloader, the direct hex code was used. Current is measured using a hall effect sensor and the voltage using a potential divider with 5V protection using a zener diode. The microprocessor also controls the outputs for the LED displays, which use shift registers.
The 7 segment LED read out.segment LED displays, again controlled by a shift register.
If you are interested in similar displays then please contact us and maybe we can help with your project.